Bluecol Antifreeze & Coolant OE 40 1L
- Meets OEM Requirements: VW TL-774 G (G12++), MAN 324 Type Si-OAT, MB 325.5, Mixed CV & Car use
- Formulated with Hybrid Organic Acid Technology (HOAT)
- Prevents winter freezing down to -36° & prevents summer boil over.
- Excellent compatibility with seals, hoses and plastic components.
| Chemical Properties | thin (low-viscosity) |
|---|---|
| Specification | AFNOR NF R15-601, ASTM D3306/D4656/D49, BS 6580: 2010 |
| Oil manufacturer recommendation | Audi/Bentley/Bugatti, Cummins (CES 14603), Deutz (DQC CC-14), Liebherr Min (LH-01-, MAN Truck and Bus (M, Mercedes Benz (MB 32 |
Bluecol Engine Coolant OE 40 is a high quality, long life ethylene glycol based coolant/antifreeze with an exceptional 5 year service life. It is specially suited for commercial & agricultural vehicles and industrial use. Suitable for Petrol, Diesel and natural gas powered engines.
Directions for Use:
- Drain & Flush the cooling system with clean water.
- Check all hoses, clips and joints for leakage.
- Refer to vehicle manufacturer’s handbook for the total volume of the cooling system.
- Remove radiator cap and pour 1.5L of clean water into radiator system. Add coolant to a volume equal to 50% of the total coolant system capacity and top up with clean water to recommended fill level. Replace cap.
- Run the engine until it reaches normal operating temperature to remove any airlocks.
- Switch off engine and allow to cool. Remove radiator cap and top up with water if necessary. Replace cap.
Note: It is recommended to have a 50/50 coolant and water mixture to obtain optimum protection. Drain and flush the system with clean water before refilling the with coolant and water mixture. If neat fluid is spilled onto paintwork, rinse off with water.
